Materials Science and Technology of Additive Manufacturing

Conference & Exhibition
10th-11th December 2019
Bremen, Germany

Save the last seats and

REGISTER NOW!

Registration is open until 30th November.

Conference Info

Objective

Materials Science and Technology of Additive Manufacturing (MSTAM) 2019 is a cutting-edge forum representing the modern technological and material-specific trends and challenges in the field of additive manufacturing. The symposium is intended to promote the exchange of experience between different industries (aircraft, automotive, power, etc.) and practically oriented research institutes.

Focus

Special focus 2019 will be on the efficiency and shortening of the process chain for production of metallic AM parts. The presentations will address all manufacturing methods like powder-bed ones (laser and electron beam melting, binder jetting) and direct metal deposition.

Topics

  • AM of titanium, aluminium, Ni-Based alloys, Copper and other metals
  • Graded materials and multi-materials
  • Surface quality, mechanical properties, testing and qualification
  • Post heat treatment and non-destructive testing
  • Process monitoring, part and process quality assurance
  • Evolution and reproducibility of microstructure and properties

Date & Location

10th-11th December 2019
Bremen Airport, Bremenhalle
Bremen, Germany

Proceedings / Publication

Submitted papers will be published in the proceedings of the conference by Scientific.Net. Selected papers also have the opportunity to be published in the periodical Advanced Materials Research of Scientific.Net

Deadlines

Submission of abstracts: 1st August 2019
Acceptance of contributions: 1st September 2019
Early bird registration: 15th October 2019
Regular registration: 30th November 2019

Tickets

Use the opportunity and order the tickets directly here via the form below or register on our XING-Events page.

**Starting from 15th October only sale of regular tickets at higher prices.

Program

08:00 - 09:00Registration (Bremen Airport, Bremenhalle, 2nd Floor)
Day 1Introduction & Keynotes
Dec. 10thProf. Dr.-Ing. Vasily Ploshikhin, Head of Airbus endowed chair ISEMP, University of Bremen, Germany
09:00 - 09:15Opening
Prof. Dr.-Ing. Vasily Ploshikhin, Head of Airbus endowed chair ISEMP, University of Bremen, Germany
09:15 - 09:30Welcome Address
Hans-Georg Tschupke, Ministry of Economic Affairs, Labour and Ports, Bremen, Germany
09:30 - 09:50Keynote: TBA
Dr. Claudio Dalle Donne, Head of Materials, Process and Testing Airbus Bremen, Germany
09:50 - 10:10Keynote: NextGenAM: new generation of industrial metal additive manufacturing
Dr.-Ing. Thomas Bielefeld, Head of Additive Manufacturing Premium AEROTEC GmbH, Germany
10:10 - 10:30Keynote: Perspectives of Additive Manufacturing @ ArianeGroup
Moritz Brünger, AM and R&T Coordinator, Future Launchers Architecture ArianeGroup GmbH, Germany
10:30 - 11:00Networkng & Exhibiton Break
Session 1Novel AM Materials & PBF Processes
Frank Palm, Senior Expert Additive Manufacturing & Welding Airbus Central Research & Technology, Germany
11:00 - 11:15Adjusted process conditions in Laser Powder Bed Fusion to obtain a single-crystal-like microstructure in IN718
M.Sc. Christoph Seyfert, EOS GmbH, Germany
11:15 - 11:30Industrial Aerospace applications of Scalmalloy
Sébastien Eyrignoux, LISI AEROSPACE Additive Manufacturing, France
11:30 - 11:45Selective electron beam melting of Al-Cu-Mg alloy: Processability and Microstructure Characterization
Mohammad S. Kenevisi, Department of Mechanical Engineering, China
11:45 - 12:00PBF-LB Process Parameter Development and Heat Treaments for a nano-duplex AlCrFe2Ni2-based High Entropy Alloy
Dimitrios Vogiatzief, Oerlikon AM GmbH, Germany
12:00 - 12:15Additive manufacturing of the refractory metal high entropy alloy W20Mo20Ta20Nb20V20
M.Sc. Florian Huber, Lehrstuhl für Photonische Technologien, Germany
12:15 - 13:15Lunch & Exhibition Break
Session 2Material & Process Control, Testing & Qualification
Dr.-Ing. Kai Schimanski, Head of Industrial Technology Varel Premium AEROTEC GmbH, Germany
13:15 - 13:30Influence of powder bed density on part quality for laser fusion additive manufacturing
Dipl.-Ing. (FH) Sebastian Edelhäuser, EOS GmbH Electro Optical Systems, Germany
13:30 - 13:45Efficient qualification strategy of new tool steel alloys for Laser Powder Bed Fusion
Dr.-Ing. Frederik Zanger, Karlsruher Institut für Technologie - wbk Institut für Produktionstechnik, Germany
13:45 - 14:00Challenges and approaches for metrology of additive manufactured lattice structures by industrial X-ray computed tomography
Philip Sperling, Volume Graphics GmbH, Germany
14:00 - 14:15Diffraction-based experimental determination of Residual Stress in AM parts: A critical discussion
Prof. Dr. Giovanni Bruno, Bundesanstalt für Materialforschung und -prüfung(BAM), Germany
14:15 - 14:30Development and qualification of a serial production launcher part made of titanium
Dr.-Ing. Loreen Mertens, ArianeGroup GmbH, Germany
14:30 - 15:00Networkng & Exhibiton Break
Session 3Oral Poster Presentations
Dr.-Ing. Kai Schimanski, Head of Industrial Technology Varel Premium AEROTEC GmbH, Germany;
Dr. Jan-Patrick Jürgens, Team Leader Thermal Simulations Airbus endowed chair ISEMP, University of Bremen, Germany
15:00 - 15:05Printing and Laser Sintering of Ag and Cu Paste - Prospects and Challenges in Additive Manufacturing
Dipl.-Ing Juliane Fichtner, Fraunhofer Institute for Machine Tools and Forming Technology IWU, Germany
15:05 - 15:10Next Generation of 3D printed tools for High Pressure Diecasting
Sten Farre, RISE Research Institutes of Sweden, Sweden
15:10 - 15:15Thermal analysis and simulation of selective laser melted wind turbine blade
Abbas Razavykia, Department of Mechanical and Aerospace Engineering, Italy
15:15 - 15:20Influence of Machine Parameters on Ti-6al-4V small sized specimens made by laser metal deposition
Sarah Milhomme, ESTIA Institute of Technology, France
15:20 - 15:25Material Certification of Additive Manufacturing Materials
Marc Mansfeld, TÜV SÜD Product Service, Germany
15:25 - 15:30Influence of thermal cycles on precipitation kinetics during Selective Laser Melting and heat treatment of AlMgSc alloy
Yuvaraj Patil, Airbus endowed chair ISEMP, University of Bremen, Germany
15:30 - 15:35A data driven approach to the monitoring of the additive manufacturing process
Jonas Holtmann, TESTIA GmbH, Germany
15:35 - 15:40Simulation of texture evolution during SLM of Ti6Al4V with Cellular Automata Finite Difference method
Mohammad Sadegh Mohebbi, Airbus endowed chair ISEMP, University of Bremen, Germany
15:40 - 15:45Thermal based process monitoring for laser powder bed fusion (LPBF)
M.Eng. Dieter Tyralla, Bremer Institut für angewandte Strahltechnik GmbH, Germany
15:45 - 16:30Networkng & Exhibiton Break
Session 4Fatigue Behaviour of AM Parts
Dr.-Ing. Gesa Rolink, Head of Material Development SLM Solutions Group AG, Germany
16:30 - 16:45Factors influencing the fatigue strength of additively manufactured Ti6Al4V
Dipl.-Ing. (SFI/IWE) Sebastian Schettler, Fraunhofer Institut für Werkstoff- und Strahltechnik IWS, Germany
16:45 - 17:00Fatigue resistance: Key criteria of Additive Manufactured Ti6Al4V for aerospace application
Prof. Dr. Mohammad Dadras, CSEM Centre Suisse d'Electronique et de Microtechnique SA, Switzerland
17:00 - 17:15A fatigue approach for additively manufactured components using representative structural elements
Dr.-Ing. Rainer Wagener, Fraunhofer Institute for Structural Durability and System Reliability LBF, Germany
Session 5Development & Certification of Materials for AM Processing
Dr.-Ing. Gesa Rolink, Head of Material Development SLM Solutions Group AG, Germany
17:15 - 17:30Alloy development for AM-processing in the system Al-Cr-Fe-Ni-Mo: pathways to novel materials with nano-scale duplex microstuctures
Sergej Gein, ACCESS e.V., Germany
17:30 - 17:45Rapid Alloy Development (RAD) due to the combined use of Laser Powder Bed Fusion (LPBF) and Extreme High-Speed Laser Material Deposition (EHLA)
M.Sc. Stephan Koss, RWTH Aachen University - Digital Additive Production DAP, Germany
19:00 - 22:00Get Together Dinner
Day 2:
Session 6
Novel AM Materials & DED Processes
Dec. 11thDr.-Ing. Rota Astrid, Team Manager Material and Process Development Metal EOS GmbH, Germany
09:00 - 09:15Wire Arc Additive Manufacturing of Magnesium alloys - progress and future aims
M.Eng. Danny Lubosch, GEFERTEC GmbH, Germany
09:15 - 09:30Wire and Arc Additive Manufacture of Alumnium lithium alloys
Dr. Eloise Eimer, Cranfield University, England
09:30 - 09:45Wire + Arc Additive Manufacture of near-beta Ti-5Al-5Mo-5V-3Cr
Armando Caballero, School of Aerospace, Transport and Manufacturing, England
09:45 - 10:00Laser Metal Deposition of Ultra-fine Duplex AlCrFe2Ni2-based High Entropy Alloy
M.Sc. Veronica Molina, Fraunhofer-Institut für Lasertechnik ILT, Germany
10:00 - 10:15Influence of In-Situ Thermal Processing on the Mechanical Propertoes of (gamma)-TiAl Intermetallic Compounds by Laser Powder Directed Energy Desposition(DED)
Dr. Damien Choron, IREPA LASER, France
10:15 - 10:45Photo-Session & Networking Break
Session 7Microstructure & Properties of DED Processes
Julian Koopmann, Corporate Research for Special Materials Volkswagen AG, Germany
10:45 - 11:00Porosity reduction strategies and mechanical properties evaluation in WAAM of Aluminium alloys
Nieves Rodríguez, IK4-LORTEK Research Centre,, Spain
11:00 - 11:15Investigating the reproducibility of material properties in wire arc additive manufactured large titanium parts
Dipl.-Ing. Christoph Halisch, BIAS - Bremer Institut für angewandte Strahltechnik GmbH, Germany
11:15 - 11:30Microstructural and mechanical analysis of high performance parts produced by hybrid additive manufacturing of powder LMD on forged base components
Dr. Susanne Hemes, ACCESS e.V., Germany
11:30 - 11:45Study of the Anisotropy of Properties in Titanium Alloys made by Plasma Metal Deposition
Erich Neubauer, RHP-Technology GmbH, Austria
11:45 - 12:00Laser metal deposition of Fe- and Co-based shape-memory alloys
M.Sc. Niklas Sommer, Universität Kassel , Germany
Session 8Prediction of Microstructure & Properties of AM Materials
Dr. Jan-Patrick Jürgens, Team Leader Thermal Simulations Airbus endowed chair ISEMP, University of Bremen, Germany
12:00 - 12:153D microstructure simulation of complex parts built additively from TI64 powder by Selective Electron Beam Melting (SEBM)
Dipl.-Ing. Johannes Köpf, Lehrstuhl Werkstoffkunde und Technologie der Metalle (WTM), Germany
12:15 - 12:30Mechanical property prediction of additively manufactured metals by micromechanical modeling
Dr.-Ing. Napat Vajragupta, Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Germany
12:30 - 13:30Lunch & Exhibition Break
Impulse LectureIndustrialization
Prof. Dr.-Ing. Vasily Ploshikhin, Head of Airbus endowed chair ISEMP, University of Bremen, Germany
13:30 - 13:45Industrialization of metal Additive Manufacturing: Current state and outlook
Dr.-Ing. Maximilian Munsch, Managing Partner Ampower GmbH & Co. KG, Germany
Panel DiscussionIndustrialization of Additive Manufacturing: Prospects for Materials & Process Development
Prof. Dr.-Ing. Jens Telgkamp, Hamburg University of Applied Sciences, Germany; Dr.-Ing. Kai Schimanski, Head of Industrial Technology Varel Premium AEROTEC GmbH, Germany
13:45 - 14:30Industrialization of Additive Manufacturing: Prospects for Materials & Process Development
Dr.-Ing. Thomas Bielefeld, Head of Additive Manufacturing Premium AEROTEC GmbH, Germany; Dr.-Ing. Gesa Rolink, Head of Material Development SLM Solutions Group AG, Germany; Dr.-Ing. Rota Astrid, Team Manager Material and Process Development Metal EOS GmbH, Germany; Frank Palm, Senior Expert Additive Manufacturing & Welding Airbus Central Research & Technology, Germany; Julian Koopmann, Corporate Research for Special Materials Volkswagen AG, Germany; Moritz Brünger, AM and R&T Coordinator, Future Launchers Architecture ArianeGroup GmbH, Germany; Dr.-Ing. Maximilian Munsch, Managing Partner Ampower GmbH & Co. KG, Germany
14:30 - 15:00Networkng & Exhibiton Break
Session 9Simulation-driven Development of Novel AM Processes
Prof. Dr.-Ing. Jens Telgkamp, Hamburg University of Applied Sciences, Germany
15:00 - 15:15Thermal analysis and laser power mapping of selective laser melting on the flat overhang geometry of 316L stainless steel
Ava Ashby, Lawrence Livermore National Laboratory, USA
15:15 - 15:30TBA
M.Sc. Oliver Illies, Airbus endowed chair ISEMP, University of Bremen, Germany
15:30 - 15:45Simulation aided process development with multi-spot strategies in laser powder-bed fusion
Marcel Slodczyk, Robert Bosch GmbH, Germany
Session 10Residual Stress, Distortion & Compensation of Distortion
Prof. Dr.-Ing. Jens Telgkamp, Hamburg University of Applied Sciences, Germany
15:45 - 16:00Uncertainty Quantification and Reduced Order Models of Powder Bed Fusion Distortion and Residual Stress Predictions
Dr. Mustafa Megahed, ESI Software Germany GmbH, Germany
16:00 - 16:15Advanced prediction and compensation of distortions in L-PBF processes
Dr. Patrick Mehmert, Simufact, Germany
16:15 - 16:30Closing Remarks
Prof. Dr.-Ing. Vasily Ploshikhin, Head of Airbus endowed chair ISEMP, University of Bremen, Germany

Organization

The MSTAM 2019 is organized by the Airbus endowed chair for Integrative Simulation and
Engineering of Materials and Processes (ISEMP) of the University of Bremen

Conference Chairmen

Dr. Claudio Dalle Donne
Head of Materials, Process and Testing
AIRBUS Bremen

Prof. Dr.-Ing. Vasily Ploshikhin
Airbus Endowed Chair for Integrative Simulation and Engineering of Materials and Processes (ISEMP / University of Bremen)

Prof. Dr.-Ing. Jens Telgkamp
Additive Manufacturing
Hamburg University of Applied Sciences


Program Committee

Dr.-Ing. Gesa Rolink
Head of Material Development
SLM Solutions Group AG

Dr.-Ing. Astrid Rota
Team Manager Material and Process Development Metal
EOS GmbH

Dr.-Ing. Kai Schimanski
Head of Industrial Technology Varel
Premium Aerotec GmbH

Frank Palm
Senior Expert Additive Manufacturing & Welding
Airbus Central Research & Technology

Julian Koopmann
Corporate Research for Special Materials
Volkswagen AG

Dr. Jan-Patrick Jürgens
Team Leader Thermal Simulations
ISEMP / University of Bremen


Contact for registration


Dr. Jan-Patrick Jürgens
Phone: +49 (0)421 218-62320
Email: registration[at]isemp[dot]de

Sponsorship

You have the chance to act as sponsor of the MSTAM
Detailed exhibitor and sponsorship information can be downloaded here shortly.

Location

The MSTAM 2019 takes place in the Bremenhalle, directly at the Bremen Airport.

Bremen Airport, Bremenhalle
Flughafenallee, Terminal 3
28199 Bremen, Germany

About Bremen

Home to the Bremen Town Musicians, worlds of discovery, Hanseatic heritage and aerospace expertise - Bremen is a destination with a wide-ranging appeal. It is the city of traditional and unusual attractions, shopping, exhibitions, plays and musicals. An old city can still be young at heart!